Need help?Do you have a question about the ATAGO NAR-2T and is the answer not in the manual?
General| Model | NAR-2T |
|---|---|
| Category | Refractometer |
| Resolution (Brix) | 0.1% |
| Resolution (nD) | 0.0001 |
| Accuracy (Brix) | ±0.2% |
| Accuracy (nD) | ±0.0003 |
| Sample Volume | 0.3 mL |
| Light Source | LED |
| Temperature Compensation | Automatic |
| Temperature Range | 5 to 50°C |
| Power Supply | Battery |
Safety warnings and guidelines for handling the instrument.
Safety instructions related to the power plug and cable.
Safety warnings for connecting the temperature bath.
Environmental and handling conditions for optimal use.
Details the components of the main refractometer unit.
Detailed instructions for connecting the temperature bath.
Procedure for calibrating the scale using distilled water.
Procedure for calibrating the scale using a test piece.
Important notes regarding temperature and measurement accuracy.
Procedure for measuring solid glass and plastic samples.
Procedure for measuring thin film samples.
How to measure samples exhibiting double refraction.
Explains the indirect method and safety for powdered samples.
General guidelines for cleaning and maintaining the instrument.
Procedure for replacing the main and secondary prism unit.
To Next Page
