Directory
Speed dialing
You can enter nine speed dial numbers of up to
24 digits. Each number is stored in a one-digit
speed dial location (1-9).
To store a number in speed dial
1. Press
PROG/MEM.
2. Enter a telephone number (up to 24 digits), or
import one by pressing REDIAL.
3. Press
PROG/MEM.
4. Press a digit to select a speed dial location (1-9).
Press CID to erase numbers if you make a mis-
take. Press CID twice to enter a three-second
dialing pause. Repeat steps 2-4 to program anoth-
er memory location, or press REMOVE to exit
without saving the number.
To change numbers
To change a number, follow the above steps 1-4
to enter another number in its place.
To call a number in speed dial
1. Lift the handset or press
SPEAKER.
2. Press
PROG/MEM.
3. Press a digit (1-9) to dial the number stored in
that speed dial location.
ENTER NUMBER
0
MSG#
5550100_
ENTER LOCATION?
0
MSG#
STORED
0
MSG#
13
To Next Page
Loading...
