Answering system operation
Changing feature options
When the answering system is on, you can customize
how the system operates. Press and hold TAS SETUP to
begin, then press repeatedly to hear each feature. Press
SKIP or REPEAT to change the setting of any fea-
ture. Or press PLAY/STOP to exit.
Feature options
(Default settings underlined).
System announces: Feature description:
2.
Press TAS SETUP
until desired feature is
heard (see list at right).
4.
Press TAS SETUP
to set selection and
move to next menu
option.
-OR -
3.
Press SKIP or
REPEAT until desired
selection is heard.
Press PLAY/STOP
to set selection and
exit menu.
1.
Press and hold
TAS SETUP for one
second to enter
feature menu.
“Selected announcement
is,” current setting, then "To
select a different announce-
ment, press SKIP or REPEAT."
Options: A/Announce only
“Number of rings is,” current
setting, then "To change the
number of rings, or select
toll saver, press SKIP or
REPEAT." Options: 2-7/24/46
(default 4)
“Message alert is,” current
setting, then "To change,
press SKIP or REPEAT."
Options: On/Off
"Remote access code is,"
current setting, then "To select
the first digit, press SKIP or
REPEAT, then press SETUP."
"Select the second digit, then
press SETUP."
"Select the third digit, then
press SETUP."
Options: 500-999
(default 500)
A: Callers can leave messages.
Announce only: Callers cannot
leave messages (page 23).
Choose number of rings before
the system answers a call (2 to 7).
There are two toll saver options:
2/4 (the system answers after two
rings if there are new messages/
memos; otherwise, it answers after
four rings) and 4/6 (the system
answers after four rings if there are
new messages/memos; otherwise,
it answers after six rings).
When on, the telephone beeps
every 15 seconds when you have
new messages.
Follow the prompts to enter a
three-digit number (must be
between 500 and 999).
24
To Next Page
Loading...
