Getting started
Installation options
Tabletop installation
position
Wall installation position
NOTE: The mounting bracket must be used for both tabletop use and wall
installation positions.
Telephone outlet mounting
plate with mounting studs.
1. To remove the bracket, hold the
telephone base in both hands, press
the two bracket tabs and lift the
bracket away from slots and .
2. Rotate the bracket to the wall
installation position, insert the tabs of
the bracket into slots and
on the
telephone base, then press the other
bracket tabs into slots and as
shown below.
Wall installation
The telephone base comes with the bracket mounted for tabletop use. If wall
installation is desired, a telephone outlet wall installation plate with mounting studs
is required. This mounting plate with studs may be available for purchase from many
hardware or consumer electronics retailers and may require professional installation.
6
To Next Page
Loading...
