AT&T 1856 - Reviewing Call History; Returning Calls from History; Dialing Options

To review the call history
To review the call history
Press CID or CID to display the most recent
call.
Press CID or CID repeatedly to scroll through
the list of earlier calls.
To return a call
To dial a number currently displayed, press
DISPLAY DIAL and then lift the handset or press
SPEAKER (see below for important dialing
options). If you forget to lift the handset or press
SPEAKER, the screen will remind you to do so
by displaying LIFT RECEIVER.
NOTE: If you have entered a home area code,
telephone
numbers from that
area code may be
displayed without
the
preceding 1
,
but they will
be dialed correctly.
Dialing options
Caller ID numbers may appear with an area code
that may not be required for local calls. If the
number displayed is not in the correct format, you
can change how it is dialed.
While the number is displayed, press CID SETUP,
then press CID or CID repeatedly to see vari-
ous dialing options (with or without area code,
with or without the preceding 1).
When the option you want is displayed, press
DISPLAY DIAL and then lift the handset (or press
SPEAKER).
CHRIS THOMPSON
MSG#
555-4321
12:55 10-23
PM
No:
0
PAT WILLIAMS
MSG#
555-0100
12:34 10-23
PM
No:
0
PAT WILLIAMS
MSG#
555-0100
12:34 10-23
PM
No:
0
LIFT RECEIVER
MSG#
555-0100
12:34 10-23
PM
0
17
Caller ID history
NOTE: You can also remove the area code or
add a preceding 1 before programming a number
into memory by pressing CID SETUP once, and
CID or CID repeatedly, until you see the
correct option.
2
1
1