10
Installation options
Getting started
3. Connect the telephone line
cord and power adapter cord to
the jacks on the bottom of the
telephone base. If necessary,
bundle the telephone cord and
power adapter cord, and secure
them with twist ties. Plug the power
adapter and telephone line into the
wall outlets.
4. If necessary, place the bundled
telephone line cord and
power adapter cord into the
cavity under the telephone
base as shown below. Align
the mounting studs on the
telephone outlet plate with the
mounting holes on the bracket.
2. Remove the handset tab from the telephone base. Rotate and replace it
to hold the corded handset securely in place when the telephone base is
mounted on the wall.
To Next Page
Loading...
Need help?
General
