40
Multiple handset use
2. If the called handset is not answered within 100 seconds, or if it is in the directory or call log
mode, or is on a call, or is out of range, the calling handset shows Unable to call. Try again.
3. Pressing OFF/CLEAR or MUTE/DELETE on the cordless handset temporarily silences the
intercom ringer.
4. You can only use one pair of handsets to make intercom calls at a time.
Using the telephone base:
1. Press INTERCOM on the telephone base,
INTERCOM TO: appears on the screen.
2. Enter a handset number. The screen shows
Calling HANDSET X. If you have a single handset
system, the base displays Calling HANDSET. The
called handset rings and its screen shows
Base is calling.
3. On the ringing handset, press PHONE/FLASH, INT,
/SPEA�ERSPEA�ER or any dial pad keys (0-9, TONE , #) to answer the intercom call.
NOTES:
1. If you press INTERCOM when there is no cordless handset registered to the telephone base,
Int requires two handsets displays on the base screen.
2. Before the intercom call is answered, you can cancel it by pressing CANCEL or INTERCOM on the
telephone base.
3. If the called handset is not answered within 100 seconds, or if it is in the directory or call log
mode, or is on a call, or is out of range, the base shows Unable to call. Try again.
4. Pressing CANCEL or MUTE on the telephone base temporarily silences the intercom ringer.
4. To end the intercom call, press INTERCOM or CANCEL
on the telephone base if you are using speakerphone
mode, or return the corded handset to the telephone
base. The other party hears four beeps. Intercom ended
appears on both handset screen and telephone base screen.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is a
two-beep call waiting tone.
Using a cordless handset:
To answer the call, press PHONE/FLASH. The intercom call ends
automatically. Other system handsets can also answer the incoming call by
pressing PHONE/FLASH.
To end the intercom call without answering or canceling the incoming call,
press OFF/CLEAR.
Using the telephone base:
Press SPEA�ER or lift the corded handset to answer the incoming call. The
intercom call ends automatically.
•
•
Intercom
Base
is calling
Calling
HANDSET X
Intercom ended
11:45
AM
12/02
To Next Page
Loading...
