32
Redial
NOTES:
If you use the speakerphone during low battery mode, the handset is not lit except for the
/SPEA�ERSPEA�ER button.
The speakerphone uses more power than regular handset use. If the handset battery becomes
very low while you are using the speakerphone, the call remains in speakerphone mode until you
hang up or the battery becomes depleted. When the battery is very low, you cannot switch a call
from normal handset use to speakerphone mode.
After installing a battery into the handset, the screen may show Low battery. If you use the
speakerphone at this time, the battery may become depleted. Follow the instructions in the
Battery installation and charging section on pages 7-8.
Last number redial
The last 20 telephone numbers dialed (up to 30 digits) are stored in thedialed (up to 30 digits) are stored in the (up to 30 digits) are stored in the
system memory.
Using a cordless handset:
To view the 20 most recently dialed numbers:
To display the most recently dialed number, press
REDIAL/PAUSE.
To view up to 20 recently dialed numbers, press REDIAL/PAUSE
then qCID or pDIR, or press REDIAL/PAUSE repeatedly.
The handset beeps twice at the end of the list.
Press OFF/CLEAR to exit.
To redial a number:
To dial the displayed number, press PHONE/FLASH or /SPEA�ERSPEA�ER.
-OR-
Press PHONE/FLASH or /SPEA�ERSPEA�ER, then press REDIAL/PAUSE
repeatedly to view the redial memory. Press MENU/SELECT to dial the
displayed number.
To edit a number:
While the desired number displays, press MENU/SELECT
(see step 5 in the To create a new directory entry section
on page 44 for details).
To delete a number:
While the screen displays the desired number, press MUTE/DELETE to
delete the number from the redial memory.
1.
2.
3.
•
•
•
•
•
•
Redial
888-883-2445
ENTER NUMBER
888-883-2445
Telephone operation
To Next Page
Loading...
