AT&T CL84350 - Dial Mode; Website

29
Telephone base settings
Telephone settings
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode on the telephone base:
1. Press MENU/SELECT in the idle mode to enter the
main menu.
2. Use q/CID or p/DIR to scroll to >Settings, then
press MENU/SELECT.
3. Use q/CID or p/DIR to scroll to >Dial mode, then
press MENU/SELECT.
4. Use q/CID or p/DIR to scroll to >Tone or >Pulse,
then press MENU/SELECT. There is a confirmation tone.
Press CANCEL to cancel.
Website
Use this feature to view the AT&T website address.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use q/CID or p/DIR to scroll to >Website, then
press MENU/SELECT.
3. Press CANCEL to cancel.
Home area code
>Dial mode
DIAL MODE
>Tone
> Website
-End of list-
www.telephones.
att.com