13
Handset settings
Menu settings
You can use the handset menu to change settings. Refer to page 24 to
change the telephone base settings.
1. Press MENU/SELECT when in idle mode (when the phone is
not in use) to enter the main menu.
2. Press qCID or pDIR to scroll to the feature to be changed.
When scrolling through the menu, the > symbol indicates
the selected menu item.
3. Press MENU/SELECT to confirm the highlighted item.
NOTE: Press OFF/CLEAR to cancel an operation, back up to the previous menu or exit
the menu display. Press and hold OFF/CLEAR to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six levels or turn the
ringer off. When the ringer is off, appears on the screen.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Ringers.
3. Press MENU/SELECT twice to select >Ringer volume.
4. Press qCID or pDIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is a
confirmation tone and the screen returns to the main menu.
Press OFF/CLEAR to cancel.
NOTE: The handset ringer volume also determines the ringer volume for
intercom calls (page 39). If the ringer volume is set to off, that handset is
silenced for all incoming calls.
Ringer tone
You can choose one of 10 ringer tones.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Use qCID or pDIR to scroll to >Ringers, then press
MENU/SELECT.
3. Press qCID or pDIR to scroll to >Ringer tone, then press
MENU/SELECT.
4. Press qCID or pDIR to sample each ringer tone.
5. Press MENU/SELECT to save your preference and return to
the main menu. Press OFF/CLEAR to cancel.
NOTE: If you turn off the ringer volume, you do not hear ringer tone samples.
>
Ringer volume
Ringer tone
RINGER VOLUME
RINGER TONE
>
Tone 1
>
Ringer tone
Ringer volume
Telephone settings
>
Ringers
Settings
>
Answering sys
Directory
To Next Page
Loading...
Need help?
General
