24
Telephone base settings
Menu settings
You can use the base menu to change settings. Refer to page 13 to change
the handset settings.
1. Press MENU/SELECT when in idle mode (when the
phone is not in use) to enter the main menu.
2. Press q/CID or p/DIR to scroll to the feature to be
changed. When scrolling through the menu, the
> symbol indicates the selected menu item.
3. Press MENU/SELECT to confirm.
NOTE: To cancel an operation, back up to the previous menu or exit the menu display,
press and hold CANCEL to return to idle mode.
Ringer volume
You can set the ringer volume level (1-6) to one of six
levels or turn the ringer off. When the ringer is off,
appears on the telephone base screen.
1. Press MENU/SELECT in idle mode to enter the
main menu.
2. Use q/CID or p/DIR to scroll to >Ringers, then
press MENU/SELECT.
3. Press MENU/SELECT again to select >Ringer volume.
4. Press q/CID or p/DIR to sample each volume level.
5. Press MENU/SELECT to save your preference. There is
a confirmation tone and the screen returns to the main
menu. Press CANCEL to exit.
-OR-
Press pq/VOLUME on the telephone base in idle mode
to change the ringer volume.
NOTE: The telephone base ringer volume also determines the
ringer volume for intercom calls (page 39). If the ringer volume is set to off, that base ringer is
silenced for all incoming and intercom calls.
Telephone settings
>
Ringers
Settings
>
Ringer volume
Ringer tone
RINGER VOLUME
RINGER VOLUME
Ringer off
>
Play messages
Answering sys
To Next Page
Loading...
Need help?
General
