AT&T DL72539 - Telephone Settings

22
Telephone settings
Use the menu to change the cordless handset settings.
1. Press MENU/SELECT on the handset when it is not in use to enter the main
menu.
2. Press CID or DIR to scroll to the feature to be changed. When scrolling
through the menu, the selected menu item is highlighted.
3. Press MENU/SELECT to select the highlighted item.
Note: Press OFF/CANCEL on the handset to cancel an operation, back up to the previous menu or exit the
menu display. Press and hold OFF/CANCEL to return to idle mode.
Ringer volume
You can select the ringer volume for incoming calls on home and cell lines.
To set the ringer volume on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press MENU/SELECT.
3. Press MENU/SELECT to select Home volume.
4. Press CID or DIR to sample each ringer volume for home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press MENU/SELECT.
3. Press CID or DIR to select Cell volume, then press MENU/SELECT,
4. Press CID or DIR to sample each ringer volume for cell lines.
5. Press MENU/SELECT to save.
Telephone base ringer volume
When the telephone base is idle, press VOL or VOL on the telephone base
to adjust the ringer volume.
Whenyousettheringervolumetozero,thebaseringerisoandthesystem
announces, “Base ringer is o.”
Notes:
 Changing the ringer volume on a handset does not aect the ringer volume of other devices.
 The ringer volume level also determines the ringer levels of intercom calls.
Telephone settings