26
Telephone settings
Telephone settings
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven digits
of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you
dial 10 digits to make a local phone call, do not use this home area code feature.
If you do, you cannot place local calls from your caller ID log, as they will have
only seven digits.
To set the home area code:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press MENU/SELECT.
3. Press CID or DIR to highlight Home area code, then press MENU/SELECT.
4. Use the dialing keys to enter a three-digit home area code.
Press CID or DIR tomovethecursortotheleorright.
Press MUTE/DELETE to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
5. Press MENU/SELECTtoconrm.
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press MENU/SELECT.
3. Press CID or DIR to highlight Dial mode, then press MENU/SELECT .
4. Press CID or DIR to choose Touch-tone or Pulse, then press MENU/SELECT.
To Next Page
Loading...
