AT&T DL72539 - Ringer Tone; LCD Language

23
Telephone settings
Telephone settings
Ringer tone
You can select the ringer tones for incoming home and cell calls.
To set the ring tone on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press MENU/SELECT.
3. Press CID or DIR to select Home ringtone, then press MENU/SELECT,
4. Press CID or DIR to sample each ring tone for home line.
5. Press MENU/SELECT to save.
To set the ringer volume on cell lines:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press MENU/SELECT.
3. Press CID or DIR to select Cell ringtone, then press MENU/SELECT,
4. Press CID or DIR to sample each ring tone for cell lines.
5. Press MENU/SELECT to save.
Note: When you turn o the ringer volume, you will not hear ringer tone samples.
LCD language
You can select English, French, or Spanish to be used for all screen displays.
To select the LCD language:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Settings, then press MENU/SELECT.
3. Press MENU/SELECT to select LCD language.
4. Press CID or DIR to highlight English, Français or Español, then press
MENU/SELECT toconrm.
Note: If you accidentally change the LCD language to French or Spanish, you can reset it back to English without
going through the French or Spanish menus. Press MENU/SELECT in idle mode, then enter
*
364#. There is a
conrmation tone.