AT&T DL72539 - Star Name List

59
Smart call blocker
Call block settings
Star name list
Therearemanyorganizationslikeschools,medicaloces,andpharmacies
that use robocalls to communicate important information to you. Robocall
uses an autodialer to deliver pre-recorded messages. By entering the name of
the organizations into the star name list, it ensures these calls will ring through
when you only know the caller names but not their numbers.
Iftherst15charactersoftheincomingcallerID’snamematchanamesavedin
your star name list, the call will get through and ring. The star name list stores
up to 10 names.
Add a star name entry:
1. Press MENU/SELECT to enter the main menu when the handset is not in use.
2. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT.
3. Press CID or DIR to scroll to Star name list, and then press MENU/SELECT.
4. Press CID or DIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays Enter name, use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
appears.Therstcharacterofeverywordiscapitalized.
 Press CID or DIRtomovethecursortotheleorright.
 Press 0 to add a space.
 Press MUTE/DELETE to erase a character.
 Press and hold MUTE/DELETE to erase all characters.
 Press TONE to change the next letter to upper or lower case.
6. Press MENU/SELECT to store your star name entry. The display shows Name
repeated if the name is already in the star name list. You cannot save the
same name twice.