33
Telephone operation
Redial
Each handset stores the last 10 dialed numbers (up
to 30 digits each) in the redial list. The list of dialed
numbers include both dialed home calls and cell calls.
To view the 10 most recently dialed numbers:
1. Press REDIAL/PAUSE in idle mode.
2. Press
CID, DIR
or REDIAL/PAUSE repeatedly
to
browse until the desired number displays.
The
handset beeps twice at the end of the list.
3. Press
OFF/CANCEL on the handset to exit.
To dial a redial entry:
When the desired redial entry displays, press
HOME/FLASH
or /SPEAKER
to dial using the home line,
or press /CELL to dial using the cell line.
Handset locator
This feature helps you ndamisplacedhandset.
To start paging:
Press FIND HS on the telephone base when it is not in
use. All idle handsets ring and display
**
Paging
**
.
To end paging:
Press HOME/FLASH, /CELL,
OFF/CANCEL,
/SPEAKER
or any dialing key
(0-9, TONE or
QUIET#)
on the handset
.
-OR-
Press FIND HS again on the telephone base.
-OR-
Place the handset in the telephone base or charger.
To Next Page
Loading...
