AT&T DL72539 - Call Block Settings; Set Smart Call Blocker On;Off; Set Profile

49
Smart call blocker
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
1. Press MENU/SELECT to enter the main menu when
the handset is not in use.
2. Press CID or DIR to scroll to Smart call blk, then
press MENU/SELECT.
3. Press MENU/SELECT again to select SCB On/Off.
4. Press CID or DIR to highlight On or Off, then
press MENU/SELECT to save the setting. You hear a
confirmation tone.
Note: If you set SCB On/O to O, all settings under Set prole (see below) will be invalid.
Set prole
Thereareveprolesettingoptions,whichallowsyoutoquicklysetupSmart
call blocker.
1. Press MENU/SELECT to enter the main menu when the handset is not in use.
2. Press CID or DIR to scroll to Smart call blk, then press MENU/SELECT.
3. Press CID or DIR to scroll to Set profile, then press MENU/SELECT.
4. Press CID or DIR to select one of the following options, then press
MENU/SELECT.
 Screen unknown - screen any home calls without numbers or with
numbers not saved in the directory, allow list, or star name list.
− Thisprolesettingsetsthetelephonetoscreenallunknownhomecallsandasksthe
callers to say their names before putting the calls through to you. See Screen unknown
home calls on page 67.
 Screen robot - screen robocalls.
− Thisprolesettingsetsthetelephonetoscreenallunknownhomecallsandasksthe
callers to press the pound key (#) before putting the calls through to you. See Screen
robocalls on page 70.