14
Telephone settings
Handset settings
Ringer volume
You can set the handset ringer volume level (1-6), or turn
the ringer o. When the ringer is o, and Ringer o
appears on the handset screen.
Press MENU/SELECT in idle mode to enter the main menu.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press MENU/SELECT to select Ringer volume.
Press CID or DIR to sample each volume level.
Press MENU/SELECT to save your preference.
NOTES:
Changing the handset ringer volume does not aect the base ringer volume. For more
information on the base ringer volume, see Telephone base ringer volume on page 20.
The handset ringer volume also determines the ringer volume of intercom calls and
paging tones.
If the ringer volume is set to o on a handset, that handset is silenced for all incoming calls
except paging tone (see Handset locator on page 28).
While the telephone is ringing, press OFF/CANCEL or MUTE/DELETE to silence the ringer
temporarily on that handset only (see Temporary ringer silencing on page 21).
Ringer tone
You can choose one of 10 ringer tones for the handset.
Press MENU/SELECT in idle mode to enter the main menu.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press CID or DIR to scroll to Ringer tone, then press
MENU/SELECT.
Press CID or DIR to sample each tone.
Press MENU/SELECT to save your preference.
NOTE: If you turn o the handset ringer volume, you will not hear
ringer tone samples.
1.
2.
3.
4.
5.
•
•
•
•
1.
2.
3.
4.
5.
Volume:
Ringer volume
ECO
ECO
Ringer tone
ECO
Tone: 1
ECO