AT&T EL52203 User Manual

55
Answering system
Answering system settings
Message alert tone
When the message alert tone is on, and there is at least one new message,
the telephone base beeps every 10 seconds. By default, the message alert
tone is set to OFF.
To change the setting:
Press MENU/SELECT in idle mode to enter the
main menu.
Press CID or DIR to scroll to Answering sys, then
press MENU/SELECT.
Press CID or DIR to scroll to Ans sys setup, then
press MENU/SELECT.
Press CID or DIR to scroll to Msg alert tone, then
press MENU/SELECT.
Press CID or DIR to choose On or O.
Press MENU/SELECT to save your setting.
NOTES:
The message alert tone beeps only if all the following conditions are met:
– The answering system is on.
– The message alert tone is on.
– There are new messages.
To temporarily turn o the message alert tone, see Temporarily turn off the message alert
tone on page 60.
1.
2.
3.
4.
5.
6.
•
•
Msg alert tone
ECO
Tone: Off
ECO

AT&T EL52203 Specifications

General

Color	silver
Speakerphone	yes
Expandable	yes
Paging Locator	yes
Volume Control	yes
Intercom	yes
Incoming Lines	1
New Message Indicator	yes
Caller ID	yes
Call Waiting	yes
Answering System	yes
Flash Function	yes
Redial Function	yes
Speed Dial Memory	yes
Caller ID Memory	50 gigabytes
Maximum Incoming Message Length	14 minutes
Phone Book Memory	50 gigabytes
Handsets	yes
Expansion Base Stations	1
Expansion Handsets	2, 5
Backlit Keypad	yes
Keypad Location	handset
Bluetooth	no
Remote Access	yes
Frequency	dect 6.0 digital

Weight and Dimensions

Depth	5.6 inches
Height	6.8 inches
Net Weight	24 ounces