60
Answering system
Answering system overview
Call intercept
While call screening, you can stop the recording and speak to the caller.
If the call is screened at the base, press PHONE/FLASH or /SPEAKER
on the handset to stop recording and speak to the caller.
If the call is screened at the handset, press PHONE/FLASH on the
handset to stop recording and speak to the caller. You can press
/SPEAKER to switch between the speakerphone and the handset.
Temporarily turn o the message alert tone
If the message alert tone is turned on, the telephone base beeps every ten
seconds when there are new messages. Pressing any telephone base key
(except /HANDSET LOCATOR) temporarily silences the message alert
tone.
If you press X/DELETE when in idle mode to temporarily turn o the
message alert tone, there is a voice prompt directing you to press X/DELETE
again to delete all old messages. The message alert tone is temporarily o.
Only press X/DELETE a second time if you wish to erase all old messages in
your answering system.
The message alert tone resumes when you receive another message.
•
•
To Next Page
Loading...
Need help?
General
Weight and Dimensions
