AT&T EL52206 User Manual

14
Telephone settings
Handset settings
Ringer volume
You can set the handset ringer volume level (1-6), or turn
the ringer off. When the ringer is off, appears on the
handset screen.
Press MENU/SELECT when the handset is idle.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press MENU/SELECT again to select Ringer volume.
Press CID or DIR to sample each volume level.
Press MENU/SELECT to save your preference.
NOTES:
Changing the handset ringer volume does not affect the base ringer volume. For more
information on the base ringer volume, see Telephone base ringer volume on page 20.
The handset ringer volume also determines the ringer volume of intercom calls.
If the handset ringer volume is off, that handset ringer is silenced for all incoming calls.
However, that handset still plays the paging tone when responding to the find handset
feature (see Find handset on page 28).
While the telephone is ringing, press OFF/CANCEL or MUTE/DELETE to silence the ringer
temporarily on that handset only (see Temporary ringer silencing on page 21).
Ringer tone
You can choose one of 10 ringer tones for the handset.
Press MENU/SELECT when the handset is idle.
Press CID or DIR to scroll to Ringers, then press
MENU/SELECT.
Press CID or DIR to scroll to Ringer tone, then press
MENU/SELECT.
Press CID or DIR to sample each tone.
Press MENU/SELECT to save your preference.
NOTE: if you turn off the handset ringer volume, you will not hear ringer tone samples.
1.
2.
3.
4.
5.
•
•
•
•
1.
2.
3.
4.
5.
Ringer volume
ECO
Volume:
ECO
Ringer tone
ECO
Tone: 1
ECO

AT&T EL52206 Specifications

General

Brand	AT&T
Model	EL52206
Category	Cordless Telephone
Language	English