57
Answering system
Answering system settings
Number of rings
You can set the answering system to answer an incoming call after 2, 3, 4, 5,
or 6 rings. You can also select Toll saver, which is explained below. Unless
you change it, the answering system answers an incoming call after
three rings.
To set the number of rings:
Press MENU/SELECT when the handset is idle.
Press
CID or
DIR to scroll to Answering sys,
then press MENU/SELECT.
Press
CID or
DIR to scroll to Ans sys setup,
then press MENU/SELECT.
Press
CID or
DIR to scroll to
#
of rings, then
press MENU/SELECT.
Press
CID or
DIR to scroll and choose among
2, 3, 4, 5, 6 or Toll saver.
Toll saver - The answering system answers a call after two rings when
you have new messages, and after four rings when there are no new
messages. This feature allows you to check for new messages and avoid
paying long distance charges if you are calling from out of your local area.
Press MENU/SELECT to save your setting.
NOTE: If you subscribe to a voicemail service offered through your telephone service
provider, see Answering system and voicemail indicators on page 60.
1.
2.
3.
4.
5.
•
6.
# of rings
ECO
3
ECO
To Next Page
Loading...
Need help?
General
