43
Caller ID
Caller ID operation
View dialing options
Although the caller ID log entries received typically have 10 digits (the area
code plus the 7-digit number), in some areas, you may need to dial only
the seven digits, 1 plus the seven digits, or 1 plus area code plus the seven
digits. You can follow the steps, as mentioned below, to change the number
of digits that you dial in the caller ID log.
When a handset is in idle mode, press
CID to
view the caller ID log in reverse chronological
order starting with the most recent call.
Before dialing or saving the telephone number in
the directory, press (pound key) repeatedly to
show different dialing options for local and long
distance numbers.
-OR-
Press 1 repeatedly if you need to add or remove
1 in front of the telephone number.
When the number is in the correct format for dialing, press
PHONE/FLASH or /SPEAKER to call the number.
To save the number to the directory, see Save a caller ID log entry to the
directory on page 45.
NOTE: If you do not need to dial the area code for local calls, make sure to program your
home area code (see Home area code on page 18).
1.
2.
3.
883-2445
1-883-2445
888-883-2445
1-888-883-2445
883-2445
1-883-2445
888-883-2445
1-888-883-2445
Press 1
Press
To Next Page
Loading...
Need help?
General
