AT&T EL52206 User Manual

28
Telephone operation
Find handset
You can use the find handset feature to find
misplaced handsets.
To start the paging tone:
Press FIND HS on the telephone base to start the
paging tone on all handsets for 60 seconds.
To stop the paging tone:
Press PHONE/FLASH, /SPEAKER,
OFF/CANCEL or any dialing key (0-9, or )
on the handset(s).
-OR-
Press FIND HS on the telephone base.
-OR-
Place the handset in the telephone base or charger.
NOTES:
If you press MUTE/DELETE on a handset, the ringer of that handset is silenced but the paging
tone continues on the other handsets.
If a handset is accessing the answering system, on a call (intercom call or outside call), or out
of range, that handset does not beep when paged.
You cannot use the find handset feature while the telephone base is playing messages or the
answering system is being accessed remotely.
•
•
•
•
•
•
•

AT&T EL52206 Specifications

General

Brand	AT&T
Model	EL52206
Category	Cordless Telephone
Language	English