AT&T EL52206 User Manual

58
Answering system
Remote access code
To access your answering system remotely from any touch-tone telephone,
you need to enter a 2-digit number (00-99). Unless you change it, the remote
access code is 19.
To change the remote access code:
Press MENU/SELECT when the handset is idle.
Press CID or DIR to scroll to Answering sys,
then press MENU/SELECT.
Press CID or DIR to scroll to Ans sys setup,
then press MENU/SELECT.
Press CID or DIR to scroll to Remote code, then
press MENU/SELECT.
Press CID or DIR to select the remote access code, or
use the dialing keys to enter the desired number (00-99).
Press MENU/SELECT to save your setting.
NOTE: For more details about the remote access feature, refer to Remote access on
pages 69-70.
1.
2.
3.
4.
5.
6.
Answering system settings
Remote code
ECO
Remote code
19
ECO

AT&T EL52206 Specifications

General

Brand	AT&T
Model	EL52206
Category	Cordless Telephone
Language	English