AT&T IFWA-40 - Connecting To The Internet; Select Internet Connection; Enter Wi-Fi Password

10
Step 3: Connecting To The Internet
(Requires purchase of a Wireless Internet Data plan)
A Select Your Internet Connection
To Connect via Wi-Fi:
1. Open the Wi-Fi network manager on your
computer or Wi-Fi enabled device.
2. Find and select the AT&T Wireless Internet Wi-Fi
network name (SSID) (e.g., AWI-XXXXXX).
To connect via WPS, see page 19.
To Connect via Ethernet:
Use an Ethernet cable to connect your computer or other device to the Ethernet
port on the back of your AT&T Wireless Internet device. Go to att.net (or your
favorite website) to conrm your Internet connection. Skip Steps 3B and 3C.
B Enter Wi-Fi Network Password
When prompted, enter the Wi-Fi password found on the bottom of the AT&T
Wireless Internet device.
XXXXXX
XXXXXXXXX
XXXXXX
XXXXXXXXX