5
Installation
Before You Begin
The AT&T Wireless Internet device works exclusively with the AT&T cellular network
and DOES NOT use your home phone wall jacks.
Your device should be located:
• Where you have a strong signal from a cell
tower, typically near a window or outer wall.
Signal strength may vary in dierent parts
of your home.
• Near an electrical wall outlet.
• In the general area where you’ll be using
your home phone, computer, or Wi-Fi
enabled devices.
Select which phone and computer/Wi-Fi enabled device you will use with the AT&T
Wireless Internet device:
• A cordless phone system with multiple handsets should be used to place phones
throughout your home.
• If using an existing phone, unplug it from the wall jack.
• For Internet access, you can simultaneously connect up to twenty (20) devices
per Wi-Fi network (2.4 GHz and 5 GHz), forty (40) total, and one (1) via Ethernet.
To Next Page
Loading...
