16
Using Your Device
Calling
Making Calls
Using a phone connected to your AT&T Wireless Internet device, place and receive
calls as you normally would. The AT&T Wireless Internet device supports dialing with
either a cordless or corded phone.
NOTE: Make sure to dial the 10-digit phone number, including area code.
Placing A Call On Hold
While on a call, you can press the Flash (or Phone/Talk) key to put the other party
on hold.
Three-Way Calling
Initiate A Three-Way Call
1. While on a call, press the Flash (or Phone/Talk) key to put the rst party on hold.
2. When you hear a dial tone (wait up to four [4] seconds), dial the second number.
3. When the second party answers, press the Flash (or Phone/Talk) key again to
complete the three-way connection. If the second party does not answer, press
the Flash (or Phone/Talk) key to end the connection and return to the rst party.
To Next Page
Loading...
