32
Phone
Problem Possible Solution
No dial tone • Make sure there is AC power to the AT&T Wireless Internet
device. Do not connect to an AC outlet controlled by a wall
switch.
• Make sure your AT&T Wireless Internet device is powered
on. Push the On/O button so that it is in the ON position
(depressed). The Power light should turn solid green.
• Make sure your cordless phone has power and is connected
properly to the AT&T Wireless Internet device.
• Move your AT&T Wireless Internet device to another area
with sucient network signal (three [3] to four [4] bars).
Caller ID shows
number only
• Like all wireless services, only the calling number is displayed
with Caller ID.
• Your home phone may support the display of names stored
in its contacts memory.
My answering
machine won’t
pick up calls
• Set your answering machine to pick up calls before four
(4) rings, so that it picks up before the network voicemail
service.
• Alternatively, have network voicemail removed from your
account by calling AT&T Customer Care. Dial 611 from your
connected phone, or dial 1-800-331-0500 from any phone.
To Next Page
Loading...
