17
Call Waiting
You will hear two tones if someone calls while you are already on a call. When this
happens, you have several options:
• To hang up on the rst call and connect the incoming call, press the 1 key and
then the Flash (or Phone/Talk) key.
• To continue the rst call and reject the incoming call, press the 0 key and then
the Flash (or Phone/Talk) key.
• To place the rst call on hold and connect the incoming call, press the 2 key and
then the Flash (or Phone/Talk) key.
• To talk with both parties at the same time, rst press the 2 key and then the
Flash (or Phone/Talk) key, and then press the 3 key and then the Flash (or
Phone/Talk) key to merge the three calls.
NOTES:
• Your AT&T Wireless Internet device comes with standard call waiting and three-
way calling. Operation of these features will vary depending on your home
phone equipment.
• If your phone does not have a Flash (or Phone/Talk) key, use the o-hook
mechanism supported by your phone.
To Next Page
Loading...
