6
Step 1: Setting Up The AT&T Wireless Internet Device
A Install The Backup Battery
1. Open the battery compartment by pushing the tab in and then liing up
the cover.
2. Insert the backup battery.
3. Replace the cover.
NOTES:
• The backup battery is intended for backup purposes only and can take up
to four (4) hours to fully charge.
• Charge time may be impacted by environmental factors; the backup
battery will stop charging when the ambient temperature is outside of the
temperature range allowed for charging: 32°F (0°C) - 131°F (55°C)
Ports
Battery
To Next Page
Loading...
