7
Step 1: Setting Up The AT&T Wireless Internet Device
(continued)
B Turn On Your Device
1. Plug the power cord in to an electrical wall outlet.
2. Connect the other end of the power cord to the Power Input port on the
back of your AT&T Wireless Internet device.
3. Press the On/O button so that it is depressed. The Power light turns
solid green.
C Check the Wireless Signal
Wait a few seconds for the Signal
Strength light to turn on, while your
device connects to the cellular network.
Conrm Signal Strength light has four (4)
lit bars for optimal performance. Fewer
bars indicate a moderate signal, which
may be sucient.
NOTE: If you do not see four (4) lit bars, you may want to choose another location
in your home, such as near a window or outer wall.
To Next Page
Loading...
