44
Wi-Fi: WPS
WPS, or Wi-Fi Protected Setup, is a standard that allows easy establishment of a
secure wireless home network. This feature is turned on by default. If you change
these settings, currently connected devices may be disconnected.
To connect a client device using WPS, on the Wi-Fi overview page, select a WPS mode.
The modes are described below.
• Device PIN: If selected, you will need to specify a 4-digit or 8-digit PIN that other
devices must enter to connect via this method. Enter the desired PIN in the PIN
eld and click the Submit button.
• Push Button: If selected, this will act in the same way as manually pushing the
WPS button on the back of the AT&T Wireless Internet device. Click the Push
WPS button, and within two (2) minutes, you will need to activate WPS on the
device you wish to connect to the AT&T Wireless Internet device via a physical or
virtual button to complete the connection process.
NOTES:
• Refer to your connecting device’s documentation for specic information on
how to complete the WPS process on the desired device.
• If the Broadcast Network Name (SSID) option is turned o, the WPS function will
not be available.
To Next Page
Loading...
