AT&T Merlin BIS 10 User Manual

CALL HANDLING
Line Button Lights
Light Meaning
Steady red You are automatically
connected to this line when
you lift the handset.
Steady green
The line is in use or the
feature programmed onto
the line button is in use.
Steady red
You are using this line
and green
button or the Line Request
feature is in use.
Steady red and
An incoming call is ringing
flashing green
on this line button or a call
you transferred is returning
to this line button.
Fast flashing You have put a call on hold
green
on this line button.
Slow flashing Someone else has put a
green
call on hold on this line
button.
Tones
Tone
Meaning
Dial tone
You can make a call.
(steady tone)
Busy (slow The phone you are calling
repeating tone) is busy.
Fast busy (fast No lines are available.
repeating tone)
Alternating high You dialed a number
and low tones
incorrectly or misused
a feature.
Confirmation tone You used a feature properly.
(double break
in dial tone
followed by
steady tone)
Callback tone
The outside line or the
(five short extension is busy and
beeps) your phone is programmed
for automatic callback.
Call waiting
tone (one or
two beeps while
you are on
another call)
You have an inside call
(one beep) or an out-
side call (two beeps)
waiting.
Rings
Ring
Meaning
One long ring
An inside call
One short ring and
An outside call
one long ring
Two short rings and
An outside call transferred to you,
one long ring
a returning transferred call, or a
returning Callback call
Conference
Conference can have up to
three inside participants,
including yourself, and up to
two outside participants.
1.
2.
3.
4.
5.
6.
7.
●
●
●
Dial the first number or
extension.
Press Conference.
(after first call is answered
which puts call on hold).
Select line button, if not
selected.
Dial next number or
extension.
Announce call and press
Conference.
Repeat Steps 2-5 for
each outside participant.
To end conference,
hang up.
Press Drop and line
button to drop any
participant added.
Press Hold to
temporarily
leave conference.
Press any participant’s
line to rejoin the
conference.
Transfer
To transfer:
1. Press Transfer.
2.
Press ICOM or SA
button, if not already
selected.
3.
Dial extension or number.
4. Announce call, if desired.
5.
Press Transfer, hang up,
or return to call on hold.
To one-touch manual transfer:
1. Press Auto Dial button.
2.
Announce call.
3.
Press Transfer, hang up,
or return to call on hold.
To one-touch auto transfer:
●
Press Auto Dial button.
Ask your system manager if
this feature is available.

AT&T Merlin BIS 10 Specifications

General

Brand	AT&T
Model	Merlin BIS 10
Category	Conference System
Language	English