24
Menu setup
Call screening
Use this feature to set whether incoming messages are played through the
speaker while they are being recorded. Call screening is On by default.
When the telephone is idle, press MENU.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select the desired line. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to Call screening. Press ENTER.
Press or to select On or Off.
Press ENTER to save your selection. The telephone
plays a confirmation tone and returns to the
previous menu.
Number of rings
Use this feature to set how many times the telephone rings before the
answering system picks up the call. You can select two, four, six or toll saver,
which is explained below. The number of rings is four by default.
When the telephone is idle, press MENU.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select the desired line. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to # of rings. Press ENTER.
Press or to select 2, 4, 6 or Toll saver.
Toll saver - the answering system answers a call
after two rings if you have new messages, and
after four rings when there are no new messages. This feature allows
you to check for new messages and avoid paying long distance charges
when calling from out of your local area.
Press ENTER to save your selection. The telephone plays a confirmation
tone and returns to the previous menu.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
•
7.
To Next Page
Loading...
Need help?
General
