31
Telephone operation
Redial
The last five telephone numbers dialed (up to 32 digits) are stored in the
redial memory.
To dial one of the five most recently dialed numbers:
When the telephone is idle, press (AUTO) REDIAL to enter the redial list
and display the most recently called numbers.
Press or to scroll to the desired number.
Lift the handset or press SPEAKER or
HEADSET.
-OR-
To dial the number using your preferred mode
(see Choose the preferred mode on page 19):
Press ENTER or DISP DIAL.
Press LINE 1 or LINE 2 to override automatic line selection.
To dial the last number dialed:
Lift the handset or press SPEAKER or HEADSET.
-OR-
Press LINE 1 or LINE 2 to override automatic line selection.
Press (AUTO) REDIAL to dial the last number dialed.
To copy a redial entry (up to 24 digits) into the speed dial memory:
When the telephone is idle, press (AUTO) REDIAL
to enter the redial list and display the most recently
called numbers.
Press or to scroll to the desired number.
Press /REPEAT or /SKIP to select Copy to SpDial.
Press ENTER. The telephone displays Press speed
dial key.
Press a speed dial key, or LOWER then a speed dial
key. The entry is saved into the location.
NOTES:
If the redial entry you saved into the speed dial memory is over 24 digits, the screen shows
Only 24 digits are allowed.
If the number you dialed is over 32 digits, only the previous 32 digits are saved in the redial.
1.
2.
3.
•
•
1.
2.
1.
2.
3.
4.
5.
•
•
To Next Page
Loading...
Need help?
General
