50
Caller ID
Saving a call history entry to a speed dial location
When in the call history (see Reviewing call history on page 47), press
or to scroll to the desired entry (up to 24 digits).
Press /REPEAT or /SKIP to scroll to Copy to SpDial.
-OR-
If you need to add or remove the area code or a 1
at the beginning of the number, do the following:
Press # (pound key) repeatedly to scroll through
the various dialing formats (area code + seven-
digit number, 1 + area code + seven-digit
number, seven-digit number or 1 + seven-digit
number).
Press /REPEAT or /SKIP to scroll to Copy to
SpDial.
Press ENTER. The screen displays Press speed dial
key.
Press a desired speed dial key.
-OR-
Press LOWER then press a desired speed dial key to store the entry.
The telephone plays a confirmation tone and the screen displays Stored to
speed dial #01 if you store the number in speed dial location 1.
NOTE: If the speed dial location you selected is occupied, the new telephone number
replaces the old one. Take caution not to replace entries you do not wish to delete.
1.
2.
a.
b.
3.
4.
To Next Page
Loading...
Need help?
General
