36
Telephone operation
Chain dialing
Use this feature to initiate a dialing sequence from numbers stored in the
directory, speed dial memory, call history or redial while you are on a call.
Chain dialing can be useful if you wish to dial other numbers (such as bank
account numbers or access codes) during a call.
To access a number (up to 32 digits) from the directory while on a call:
Press DIR.
-OR-
Press MENU, then press or to scroll to
Directory. Press ENTER.
Press or to scroll or press the dialing keys to
find the desired entry (see Searching by name on page 43).
Press ENTER to dial the displayed number.
To access a number (up to 24 digits) from the speed
dial memory while on a call:
Press the speed dial key.
-OR-
Press LOWER, then press the speed dial key.
The number is dialed automatically.
To access a number (up to 24 digits) from the call history while on a call:
Press CID.
-OR-
Press MENU, then press or to scroll to Call log.
Press ENTER.
Press /REPEAT or /SKIP to scroll to Line 1, Line 2
or Both to review the call history entries on one or both lines.
Press ENTER.
Press or to scroll to the desired number. Press ENTER to dial the
displayed number.
To access the last number dialed (up to 32 digits) while on a call:
Press (AUTO) REDIAL. The number is dialed automatically.
-OR-
Press MENU. Press or to scroll to Redial last #. Then press ENTER
twice to dial the number.
1.
2.
3.
•
1.
2.
3.
•
To Next Page
Loading...
Need help?
General
