ATCOM A26 User Manual

A2X(W)/A20LTE IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITEwww.atcom.cn16
D. Disassemble the stand bracket:
Push the spring joint of stand and pull the stand according to the direction of the arrow.
When the joints are pulled out of the slot, you can take off the stand bracket
2. Wall-hung Installation
A. Put the bottom side of the IP phone upside and press one-sidejoints of wall-hung stand
bracket into the slot, please refer the picture as below:

ATCOM A26 Specifications

General

Brand	ATCOM
Model	A26
Category	IP Phone
Language	English