- 7 -
System Requirements
Console
A VGA, SVGA, or multisync monitor capable of the highest
resolution you will be using on any computer on the
installation.
A PS/2 keyboard
A PS/2 mouse
Computers
The following equipment must be installed on each computer that
is to be connected to the system:
A VGA, SVGA, or multisync port
A PS/2 keyboard port
A PS/2 mouse port
Cables
Two or four custom KVM cable sets are provided with the CS-
82AC or CS-84AC packages only, as follows:
CS82AC includes 2 x 1.2 m cables
CS84AC includes 2 x 1.2 m and 2 x 1.8 m cables.
If you have purchased the CS-82A or CS-84A package, note that
only custom KVM cable sets specifically designed to work with
this switch may be used. KVM cable sets are available in 1.2, 1.8,
3, 5, 10, and 20 meter lengths.
Please please www.aten.com or contact your dealer for further
details.
Optional Accessories
USB-to-PS/2 Converter – to connect to computers that do not
have PS/2 ports.
Sun Console Converter – to connect to Sun systems
Power Adapter (DC9V, 300mA) – required if your installation
exceeds 10 m.
To Next Page
Loading...
Need help?
General
