33
Chapter 6
The Firmware Upgrade Utility
The Windows-based Firmware Upgrade Utility (FWUpgrade.exe) provides a
smooth, automated process for upgrading the KVM switch’s firmware. The
Utility comes as part of a Firmware Upgrade Package that is specific for each
device. Check the web site regularly to find the latest packages and information
relating to them at
http://www.aten.com
Before you Begin
1. From a computer that is not part of your KVM installation go to our
Internet support site and choose the model name that relates to your device
(CS1762
A / CS1764A) to get a list of available Firmware Upgrade
Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
3. Disconnect the CS1762
A / CS1764A from your KVM installation and
power it off. Connect one of the USB DVI KVM cable set’s Type A USB
connectors to a USB hub port on your computer.
USB DVI
KVM Cable Set
4
3
5
5
To Next Page
Loading...
