CS1792 / CS1794 User Manual
8
Rear View
* If the Console monitor has built-in speakers and supports audio through
its HDMI interface, separate speakers do not need to be used.
No. Component Description
1
Firmware Upgrade Port The Firmware Upgrade Cable that transfers the firmware
upgrade data from the administrator’s computer to the CS1792
/ CS1794 plugs into this connector. See Chapter 5 for firmware
upgrading details.
2
USB Console Ports Your USB keyboard and mouse plug in here.
3
Console Analog Audio
Ports
The cables from your microphone and speakers plug in here.
Each connector is marked with an appropriate icon.*
4
KVM Port Section The cables that link the CS1792 / CS1794 to your computers
plug in here. Each KVM port is comprised of a microphone
jack, speaker jack, USB type B socket, and an HDMI
connector.
5
Power Jack The power adapter cable plugs into this jack.
6
USB 2.0 Peripheral Port USB 2.0 peripherals (printers, scanners, etc.) can plug into
this port.
7
Console Monitor Port The cable from your HDMI monitor plugs in here.
To Next Page
Loading...
