3. Basic Operation
31
Powering Off and Restarting
If it becomes necessary to power off a CS1798 / CS17916, do the following
before restarting it:
1. Unplug the CS1798 / CS17916 from its power source.
2. Shut down all the computers that are attached to it.
Note: Unplug the power cords of any computers that have the Keyboard
Power On function. Otherwise, the CS1798 / CS17916 will still
receive power from the computers.
3. Wait 10 seconds, then plug the CS1798 / CS17916 back in.
4. Power on the computers.
Note: If there are stations cascaded down from the master CS1798 / CS17916,
all the cascaded stations and the computers attached to them must be
shut down as well.
To Next Page
Loading...
