ATEN CS782DP - Hotkey Port Selection and Modes

- 16 -
Hotkey Port Selection
All hotkey operations begin by tapping the Scroll Lock key
twice. To toggle the KVM and Audio focus between the two
ports, tap Scroll Lock twice and then press Enter. See the
Hotkey Summary Table, page 16, for full details.
Note: If using [Scroll Lock] conflicts with other programs,
[Ctrl] can be used instead.
Alternate Entering Hotkey Mode
 Press [Scroll Lock] [Scroll Lock] [x] [Enter]. The entering
hotkey mode hotkey is now [Ctrl].
or
 Press and hold the remote port selector switch for three
seconds. The entering hotkey mode hotkey is now [Ctrl].
Note: These procedures toggle between the two methods.
Hotkey Summary Table
Combination Function
[Scroll Lock]
[Scroll Lock] +
[Enter] Toggles the KVM and Audio focus
between the two ports. If the KVM
and Audio focus are on different
ports, only the KVM focus switches.
[k] [Enter] Only toggles the KVM focus.
[s] [Enter] Only toggles the Audio focus.