ATEQ D620 - Page 28

D620.388.00_QS_UK_01
28 / 42
Indirect mode - Internal pressure reading on regulator output
- until 0.5 Mpa
Use this configuration for indirect mode at medium pressure range.
Connections
Connection Option / description
Air supply to2
Connection of the air supply to the filter input (0.6 MPa)
5 to4
Connection of the regulator output to the part under test
4 to3
Connection of the part to the test input (indirect mode option)
4 to1
Connection of the test to part (regulator side) to P connector (external back
pressure option)
6 to ATM
Connector left free to the atmosphere