ATEQ D620 - Page 37

D620.388.00_QS_UK_01
37 / 42
User adjustments
OPTIONS OF THE MENUS
Different menus are accessible on the MAIN MENU screen.
For more information, refer to the Reference Manual.
SPE CYCLE menu
Use this menu to carry out specific procedures necessary to ensure the proper operation
of specific measurement cycles (for example, adjustment of pressure regulator).
none
no e
Regulator adjust.
Inf Fill
Piezo auto zero
SPECIAL CYCLE MENU
Label Special cycle Description of the cycle
none
None No special cycle selected
Regulator adjust.
Regulator adjustment Adjustment of regulator in front panel
Inf Fill
Infinite fill Pressurize the part with a infinite fill time
Piezo auto zero
Piezo auto zero Auto zero cycle on the piezo sensor
TO START SPECIAL CYCLES...
1. On the SPECIAL CYCLE MENU screen, select a
cycle, and press to validate.
2. Press Start to execute the cycle.
3. To stop the current cycle press Reset .