ATEQ D620 - Page 26

25 / 68
FG_D6_PROFIBUS_EN_01 / 2020-06-17
Address (bytes)
Description
0Ch – 0Dh
Real time test results
Bit 0 = 1 > Pass part. (OK)
Bit 1 = 1 > Fail test part. (NOK)
Bit 2 = 1 > Fail reference part. (NOK)
Bit 3 = 1 > Alarm.
Bit 4 = 1 > Pressure error.
Bit 5 = 1 > Cycle end (system ready).
Bit 6 = 1 > Part recoverable.
Bit 7 = 1 > Calibration error.
Bit 0 = 1 > Not used.
Bit 1 = 1 > ATR fault.
Bit 2 to 7 > Not used, all always at 0.
0Eh – 0Fh
Program step in progress.