ATEQ F670 - Functions

Quick start - F670
MR-36300C-U Quick start manual ATEQ F670 Page 18/25
6. FUNCTIONS
6.1. PROGRAMS FUNCTIONS
The functions program allows improving the test measurement or suit the program or the
device to its environment.
These functions are:
¾ Name
¾ Program sequence
¾ Units
¾ Filter
¾ Automatic Connector
¾ Calibration check by volume
¾ Transient Attenuation (ATR 0, 1 , 2 or
3)
¾ Pre Fill Type
¾ Fill Type
¾ Valves Codes
¾ Auxiliaries Outputs 24 V DC
¾ End Of Cycle
¾ Mini-Valve ----------------
¾ Rework Limit
¾ Sealed Components
¾ N tests
¾ Peak Hold
¾ Reference Volume
¾ Volume Compute
¾ Temperature 1 Correction
¾ Sign
¾ Flow Level
¾ No Negative
¾ Absolute
¾ Display Mode
¾ Buzzer
These functions, to appear in the program, must be activated first in the
"More functions" menu.
Then it must validate and configure it in function menu of the program.
Each program can be individually personalized.