8 Adjustments and servicing procedures
8.1
Air filters
Warning
Stop the compressor, close the air outlet valve, press the emergency stop button and
switch off the voltage. The operator must apply all relevant Safety precautions.
Position of air filters
Air filters (1)
Procedure
Step Action
1 Remove the filter elements (1).
2 Fit the new filter elements (1).
3 Reset the service warning after carrying out all service actions in all applicable service
plans. Refer to the service menu section of the regulator.
8.2 Coolers
Warning
Stop the compressor, press the emergency stop button and switch off the voltage. The
operator must apply all relevant Safety precautions.
Instruction book
110 9829 3178 63
To Next Page
Loading...
