• Wear a safety helmet when working in the area of overhead or lifting equipment.
•
Protect hands to avoid injury from hot machine parts, e.g. during draining of oil.
• Protection caps, bags, etc. must be removed before connecting the pipes.
• Water hoses must be of correct size and suitable for the working pressure.
• The water connections must be free of strain.
• Pipe work or other parts with a temperature in excess of 70 ˚C (158 ˚F) must be guarded or
insulated. Other high-temperature pipe work must be clearly marked.
• The water system installed outside the machine has to be protected by a safety device with
set pressure according to the maximum cooling water inlet pressure.
• All maintenance work shall only be undertaken when the machine has cooled down.
• Never weld or perform any operation involving heat near the oil system.
Instruction book
26 9829 3178 63
To Next Page
Loading...
